Product Catalogue
- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
Injection Molding Machine
This machine adopts our own advanced technology. So it has characteristics of low energy consumption and noisy, high output, smooth operation, and long useful-life.
We have several models for choosing. Also, our machine can be customized under the necessity and the special requirements of our clients.
It is precision and smooth, saving power and time; it can also assure high capability.
injection molding machine
injection molding machine
Injection molding machine
Features:
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control clamping and injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential area high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container.
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control clamping and injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential area high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container.
Product DescriptionSHE series injection molding machine, whose clamping force is from 400 KN to 38,
000 KN, the theoretical shot volume is from 60 cubic cms to 80, 000 cubic cms. Depending
on excellent quality, technology and after service, our injection moulding
machines have been well sold in the whole China and exported to 25 countries
and regions such as Japan, France, Saudi Arabia and Indonesia, etc.
000 KN, the theoretical shot volume is from 60 cubic cms to 80, 000 cubic cms. Depending
on excellent quality, technology and after service, our injection moulding
machines have been well sold in the whole China and exported to 25 countries
and regions such as Japan, France, Saudi Arabia and Indonesia, etc.
LTEM
|
LTEM MACHINE MODEL
|
UNIT
|
HS-650
|
Injection Unit
|
Screw diameter
|
mm
|
32 35 38
|
Theoretical shot capacity
|
mm3
|
8096113
|
|
Max.injection pressure
|
Mpa
|
203 169 144
|
|
Injection rate
|
g/s
|
62 7487
|
|
Plastcization capacity
|
g/s
|
10 14 17.5
|
|
Screw speed
|
r.p.m
|
0-180
|
|
Clamping Unit
|
Locking force
|
KN
|
650
|
Stroke of moving platen
|
mm
|
260
|
|
Min.mould thickness
|
mm
|
100
|
|
Max.mould thickness
|
mm
|
300
|
|
Space between tie-bars
|
mm
|
300300
|
|
Hyd ejector force
|
KN
|
27
|
|
Hyd ejector stroke
|
mm
|
85
|
|
General
|
Pump power
|
KW
|
11(7.5)
|
Heating power
|
KW
|
5.9
|
|
Oil pump capacity
|
L/min
|
64
|
|
Oil tank capacity
|
L
|
160
|
|
Size(IWH)
|
m
|
3.70.951.55
|
|
Machine weight
|
t
|
2.3
|