- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
Sandwich Reducing Valve
Sandwich reducing valve
sandwich reducing valve is a type for reducing the pressure in some loop on a hydraulic system.
it is a type for reducing the pressure in some loop on a hydraulic system.
Hydraulic sandwich valve
hydraulic sandwich valve Features
1.High pressure ,high flow rate.
this series of valves has greatly enhanced the pressure and flow rate compare with our conventional products.
Max.operating pressure has enhanced by 10%(31.5--35 mpa)
Max.tank line back pressure Mpa has enhanced by 30% (16-21 Mpa)
Max.flow rate has enhaced by 60% (63--100L/min)
2.Low pressure drop
this fitting can decrease the power consumption efficiently.the pressure drop decrease by 10% compare with the former design.
3.High reliability
this series valves has good performance even under contaminative condition by the use of high absorbing power solenoids and a strong spring returned force.
Specifications
Max.change over frequency cycles /min:300
Valve type |
Model number |
Max.flow L/min |
Max.operating press.Mpa |
Max.tank line back press.Mpa |
|
Standard |
DSG-01-3C--HP |
100 |
35 |
21 |
|
DSG-01-2D2--HP |
|||||
DSG-01-2B---HP |
Valves other than the types above are available ,please contact us for your requirement.
Pressure Controls
Screw-in cartridge valves
Explosion isolation valves
Internal gear pumps
Hydraulic assembly
Hydraulic motors
Solenoids
Manifolds
Proportional amplifier
Model
|
02
|
03
|
Flow (l/min) |
35
|
70
|
Hydraulic Fluid |
Mineral Oil, Phosphate
|
|
Viscosity (mm2/s) |
2.8~100
|
|
Fluid Temp. () |
-20~70
|
|
Maximum Pressure (MPa) |
31.5
|