- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
Mixed two-color injection molding machine for plas
This type machine can mould the product which is mixed by two different plasticizing materials or colors. Colors, patterns and figures of product are free. Our sandwich injection molding machine packs several powerful features:
1. There are two sets of proportional control valves which can simultaneously control the pressure and speed of both sets.
2. With an accuracy reaching 0.01mm, linear potentiometers are used in the two injection sets and clamping molds to accurately control the injection process and the opening and closing of mold.
3. With features such as limitations for screw cold starts, broken wire detection,etc., a PID temperature controller is used to control the temperature at 1C.
4. The microprocessor control system not only has memory functions,it can also perform 8-stage.
Technical specification
LTEM MACHINE MODEL |
UNIT |
A? |
B? |
Screw diameter |
mm |
40 |
30 |
Theoretical shot capacity |
mm3 |
154 |
82 |
Max.injection pressure |
Mpa |
140 |
74 |
Injection rate |
g/s |
169 |
227 |
Plastcization capacity |
g/s |
70 |
55 |
Screw speed |
r.p.m |
17 |
9 |
Locking force |
KN |
175 |
190 |
Stroke of moving platen |
mm |
1250 | |
Min.mould thickness |
mm |
355 | |
Max.mould thickness |
mm |
130 | |
Space between tie-bars |
mm |
430 | |
Hyd ejector force |
KN |
410355 | |
Hyd ejector stroke |
mm |
32 | |
Pump power |
KW |
125 | |
Heating power |
KW |
13 | |
Oil pump capacity |
L/min |
10741+66 | |
Oil tank capacity |
L |
7.2 |
3.6 |
Size(IWH) |
m |
470116170 | |
Machine weight |
t |
3.6 |