Product Catalogue
- Transfer Type Molding Machine
- Plate Vulcanizing Press
- Vacuum Vulcanizing Press
- Rubber Injection Molding Machine
- Transfer Type Molding Machine For Thermoset Plastic
- Rubber Mould
- Rubber Products
Series solenoid for explosion-isolatied valve
Attention:
1.The manual push rod at the end may be used during hydraulic system testing,with automatic reset functions.
2.For installation, use screws with a tensile strength of greater than 85kg/mm2 (Available at the time of purchase).
3.Inlet O-Ring must fully comply with Gb1325-76 Standards.
4.Remove the cover, tightenm it again after wiring to the base. There is a rubber ring at the cover wire entrance, when the threaded cover is tightened, wiring in the plug will be tightly clamped.
5.Cable must comply with explosion-proof requirements
Model description
External dimensions
1.The manual push rod at the end may be used during hydraulic system testing,with automatic reset functions.
2.For installation, use screws with a tensile strength of greater than 85kg/mm2 (Available at the time of purchase).
3.Inlet O-Ring must fully comply with Gb1325-76 Standards.
4.Remove the cover, tightenm it again after wiring to the base. There is a rubber ring at the cover wire entrance, when the threaded cover is tightened, wiring in the plug will be tightly clamped.
5.Cable must comply with explosion-proof requirements
Technical specification
Model |
dMFZ-37-MA |
dMFB-37-BT4 |
DTBZ90FYC-MAI |
Rated Voltage |
DC:12V. 24V.48V |
B:48V(Input Voltage:110VAC) B:99V(Input Voltage:220VAC) |
DC:12V. 24V |
Rated Travel (mm) |
2.8 |
2.8 |
4 |
Toal Travel (mm) |
6 |
6 |
<9 |
Attraction Force (N) |
37 |
37 |
>90 |
Power (W) |
22 |
22 |
36 |
Nominal Fluid Pressure (MPa) |
10 |
10 |
21 |
Connection Dimension (mm) |
193.5 |
193.5 |
323 |
Installation Dimension (mm) |
3535 |
3535 |
4949 |
Application |
Under-well or on-the- ground inflammable, explosive locations |
On-ground inflammable, explosive locations |
Pilots for proportional direction control valves, proportional press. control valves in explosive and inflammable locations |
Model description
External dimensions